The boards
Each app has a layout for each screen shape. The install page writes TFN OS to all six boards. New to these boards? Start with the Touch-LCD-3.49: TFN OS started on it, and it has each part that the games use.
Drawn to the same scale from the real screen sizes. The cases are close, not exact. The outlines show the real shape of each board and its screen.
Touch-LCD-3.49 Waveshare
3.49 in, 640 x 172, a long bar. ESP32-S3, 16 MB flash.
Motion sensor, speaker, two microphones, SD card, BOOT key.
Each app has a bar layout. The games keep their controls near the ends, where the thumbs rest.
Waveshare
CoreS3 and CoreS3 SE M5Stack
2.0 in, 320 x 240. ESP32-S3, 16 MB flash.
Motion sensor, speaker, two microphones, camera, microSD slot, in a closed case.
The SE has no motion sensor and no camera: the tilt games give it touch controls.
CoreS3 CoreS3 SE
AMOLED-1.75C Waveshare
1.75 in round AMOLED, 466 x 466. ESP32-S3, 32 MB flash.
Motion sensor, speaker. About 25 MB of the flash keeps your apps.
A round menu and round layouts. It has no SD card, so the games with a big data pack do not run on it.
Waveshare
AMOLED-1.8 Waveshare
1.8 in AMOLED, 368 x 448. ESP32-S3, 16 MB flash.
Motion sensor, speaker, microphone, SD card.
The apps draw their 320 x 240 layout 1.4 times bigger, so the pixels are softer than on a native layout.
Waveshare
SenseCAP Watcher Seeed Studio
1.45 in round, 412 x 412. ESP32-S3, 32 MB flash.
A wheel, speaker, microphone, camera.
Turn the wheel to choose, push to open, hold to go back. With no motion sensor, the tilt games read the wheel. The install replaces the Seeed firmware; the page can save a copy first.
Seeed Studio
Tab5 M5Stack
5 in, 1280 x 720. ESP32-P4, 16 MB flash.
Motion sensor, microphones, SD card, the M5Stack keyboard.
The apps draw a 360 x 640 frame, and the board shows it 2 x 2 on the 5 inch screen. The flash keeps a free slot for a boot menu and a second system.
M5Stack